Alarming
The following function blocks for alarming operations are available:
| Function block | Description |
|---|---|
| ALM_ACK | Acknowledges an existing alarm. |
| ALM_ALARM | Sends alarm states to the OPC UA server. |
| ALM_ALARM_PARAM | Sends alarm states with user-defined parameters to the OPC UA server. |
| ALM_CONF | Confirms an existing alarm. |
| ALM_CUSTOM_ALARM | Allows to define a user-defined alarm function block. |
| ALM_REGISTER | Registers an alarm in the system. |
| ALM_REGISTER_PARAM | Registers an alarm with user-defined parameters in the system. |
| Note
For information on the alarm handling, see the topic "General Information on Alarms". |