|
Type
| Function |
|
Description
| Subtracts the duration (LTIME) connected to IN2 from the point in time (LDATE_AND_TIME) connected to IN1 and delivers a point in time (LDATE_AND_TIME) as result.
Note
This function is not extendable, no further inputs can be added. |
|
|
Notes
|
- When the subtraction result exceeds the permissible range of the output value, an overflow occurs.
- The function provides implicit data type conversion at its input and output parameters according to the rules defined by the IEC 61131 standard.
|
|
Parameters
| Inputs
 IN1
| Data type: | LDATE_AND_TIME |
| Description: | Point in time to subtract from. |
IN2
| Data type: | LTIME |
| Description: | Duration subtracted from IN1. |
Output
Out
| Data type: | LDATE_AND_TIME |
| Description: | Result point in time. |
|
|
Error behavior
| Error behavior
The following table shows the errors which may occur while executing the function and the value returned by the function in the corresponding error case.
| Error case | Output value |
| Overflow | Overflow value |
|
|
Additional information
| EN/ENO behavior
The POU is only executed if TRUE is applied to the EN input. If EN = FALSE, the POU is not executed and ENO = FALSE indicates the inactivity.
If any of the errors listed under "Error behavior" occurs while executing the function, ENO is set to FALSE.
|