• Home
• Function/Function Block Reference
• Safety-Related Recipe Handling Function Blocks
• SF_RecipeWrite
• PayloadWrite** inputs

PayloadWrite** inputs

The PayloadWrite** input is present 16 times, numbered from 0 to 15. At these inputs, the values to be written into the addressed recipe file data set have to be specified.
Each data set in a recipe file has the size of 64 byte, i.e., consists of 16 values, each 4 bytes in size. Therefore, the set of payload values fits into one data set.

Data type: SAFEDWORD
Initial value: 0

Connection: Connect literals or variables of the data type SAFEDWORD with the values suitable for your safety application.

Only values which correspond to the results of your risk analysis may be applied to these inputs. Observe the hazard message below this table.

WARNING

Non-conformance to safety function requirements Verify that the payload values applied to the inputs of the function block correspond to your risk analysis. Be sure that your risk analysis includes an evaluation for incorrectly setting the payload values at the inputs. Validate the overall safety-related function with regard to the set payload values and thoroughly test the application.