'Settings' Editor (Safety PLC)
The following information refers to a specific, typical device type. Your screen may differ.
This help topic describes the 'Settings' editor of the 'Safety PLC' PLANT node.
| Note
To be able to edit safety-related data, you have to be logged on to the Safety-related Area. Refer to the topic "Safety-Related Area with Password Protection" for details. |
On the left side on the 'Settings' page, several editor categories can be selected. These are described below in detail.
This topic contains the following sections:
'All'
After selecting the 'All' category, the settings that are available in each category are visible on one page.
'Safety controller'
This page displays the version number of the safety controller.
'Profisafe - *** diagnostic variables (4 categories)'
On these pages you can specify which diagnostic variables for monitoring and evaluating Profisafe devices and the Profisafe communication are to be created. For that purpose, select 'Create' from the list box of the desired variable.
| Further Info
Details can be found in the topic "Profisafe Communication/F-Device State Diagnostics". |
'Profile'
The page displays the firmware profile version of the controller used.